Embellished Burlap Table Runner How-to

     I wanted to have something fantastic on the table for Christmas dinner this year.  I've seen a lot of burlap being used for various projects and thought to myself, why not a table runner?  From there, the idea just kind of took off on it's own and evolved several times.  At the end, though, I'm super happy with what came to be...

         
    There were a few firsts for me, (using burlap, fabric ink, and a new material for stenciling) so it was a bit of a shot in the dark experiment.  Sometimes shots in the dark work out!

Here's what you'll need:

Main fabric- I used burlap.  You can find it at your local fabric store.  You'll want enough to have one continuous strip across your table plus about 12" or so on either side to hang over.  (So length of table + 24")
Backing fabric- I used muslin that I had in my fabric stash.  There should be the same amount of backing as there is main fabric.
Rotary cutter and Scissors
Ruler or measuring tape.
Sewing Machine
Thread
Pins
Paint Mask- This was a first for me.  I guess this stuff is used for painting cars, but it can be found at vinyl suppliers (I used H&HSignSupply.com).  You'll need enough for your graphics plus a 1-2" border around the design.
Transfer tape or contact paper
Squeegee
Sponge Paint Brush
Fabric ink- I used the stuff that came in my Silhouette kit, however, it's the same as you can find at the hobby store for silkscreening.
Vinyl Cutting Machine or a steady hand, utility knife, and a lot of patience- I used my Silhouette Cameo, as I am seriously lacking in that kind of patience and it was a huge design.  If it's just a small one, I could see doing it by hand, though.
Weeding Hook or needle and tweezers
Iron and/or Heat Press- I used both, though just an iron would be okay.  You'll see in the tutorial how I used them.
Freezer paper or scrap paper- To keep the ink from bleeding through onto the surface of whatever you are painting on.

Step 1- Cut your main fabric and backing to the size of your table plus 24" (that gives you 11" of overhang on either side after factoring in a 1" seam allowance) for the length and then the width you want plus 2".  (Mine was 20" wide.)  For burlap, I found that an easy way to make a straight cut was to pull on one of the end threads.  It would gather the burlap and eventually snap, but left a nice, clean straight line to follow for when you cut it.

Step 2- After your main fabric and backing are cut, iron freezer paper on to the back of your main fabric.  (Main fabric being the top fabric that you are going to paint.  See which side of the burlap you want to use... some sides are prettier than others, and iron the freezer paper onto the ugly or "wrong" side.

And keep ironing...

... until the back parts of the runner that will have the graphics on them is completely covered.

Step 3- Using your cutting machine, cut out your design on your paint mask.  You may have to cut the paint mask down to fit onto your mat.

     Also, if your design is large.... you may have to cut it in several sections.

Step 4-  Weed your design.  Using your weeding hook, remove the parts of the stencil that you will want to paint.  This part may leave you a little covered in paint mask vinyl.

Step 5-  Lay out your design the way you want it.

     Once you're happy with how it looks (keep seam allowances in mind!  Don't place it too near the edge or some may disappear into a seam), use your transfer tape or contact paper to remove the design from the backing and onto your main fabric.  (Use the squeegee over the transfer tape once it's on top of the vinyl and then peel off the backing... then place it on your main fabric and squeegee again.)  Before I put the contact paper on top of the vinyl to remove it from the backing, I like to stick the contact paper on the carpet and pull up a few times to get the stickiness down a bit.  Makes it easier to remove later.

Step 6- This is BY FAR the hardest part of making this.  Peel back the transfer tape.  Go slow, take your time.  Cut the excess transfer tape away as you're doing it. I don't have a photo of this step because I was charging my phone, but use one hand to hold down the vinyl and the other to remove the transfer tape.  This takes awhile.  Be patient.

   I do, however, have a pic of some of the words with the transfer tape peeled off while the rest wait for  transfer tape and placement.

     As you get the decals on there, go back over them gently with your squeegee, and/or press firmly with your hand to resticky it to the main fabric if it came up at all.

Step 7-  Now comes the fun part.  Using your sponge brush, apply the fabric ink to the decals, being careful to stay within the frame of the decal and not go out of the lines.  I did a thin coat and waited for it to dry.  Then did a second coat a bit thicker... blotting up and down with my brush.

     What you DON'T want to do, is paint so forcefully that you pull up your stencil... or blob so much paint that it bleeds all over the place regardless of the stencil.  The freezer paper will also help keep the ink in check.

Step 8-  Once the paint is COMPLETELY dry, peel back the stencil.  This was my favorite part by far.  So fun to see the end result peeking through.  Then, heat seal it.  You can either use an iron and iron through a protective layer of fabric (such as an old pillowcase) or a heat press if you want to blaze through it.  Make sure you use a teflon sheet if you use your heat press.

Step 9-  Now it's time to sew it together.  Pin your fabric right sides together.  Starting on one long side, sew down and around 3 sides with a 1" seam allowance.  Leave one short side open so you can turn it right-side out.  Iron.

Step 10- Tuck the unsewn short side inside 1" and press flat.  Sew as close to the edge as you can.  To finish the runner off, top stitch around the entire  runner.  I topstitched slightly under 1" to catch and hold all of the layers.  Then, you're done!

     Send pics if you guys make some!  I'd love to see them.  Enjoy!

Crazy Week!

     So it's been a bit of a crazy past week.  Been trying to get everything in order before the baby arrives so I've been on a bit of a crafting spree as well as nesting like mad.  (I've joked that my nesting is manifesting itself in the form of crafting... it just may be!)

     To start with, I made a cute crab blanket from some fabric that I found on Fabric.com.  The crab material is https://www.fabric.com/ProductDetail.aspx?ProductID=9cf98664-8bea-4088-8db2-5a2bf2ecfc44 and I got some blue bubble flannel for the backing.

     Then, our chickens (whom we refer to as "The Ladies") started laying!  We were so excited to discover our first egg last Monday.

     They started off laying one egg a day until we got to Day 5, when we got 3 in one day! 

End of Day 5... 7 eggs!

     Since they're just starting out, the eggs are kind of sporadic.  However, the kids are super excited and now have to take turns going outside to check for eggs.  Each child has an assigned "egg day".  It's probably the one chore that they all fight over.  :) 

     Unfortunately, a few weeks ago, our neighbor's pitbull dug a hole under the fence and bit one of our chickens' heads off.  (Sorry for that mental image.)  The little kids don't know, but Cam helped me take care of the body and we were horribly upset to lose one of our ladies.  Not only because she was so close to laying, but we had raised her from a chick and each of the chickens really has become a pet at this point.

     Next in our week, was the new dining room table.  We've had a counter-height table that seats 4 for a few years now.  However, it's hard for Scarlett to climb up on the chairs when it's dinner time and when Travis is home, the entire family can't sit down at the table at once.  (We had to set Scarlett up in her old high chair at those times, which she LOATHED.)  Time for a new table.  I scouted around and decided to pick one up from Overstock since they were having a sale and I purchased through a rebate site in addition to the sale and a coupon I had found.  In short, I got a good deal that I couldn't pass up.

     However, putting the table together was an entirely different story.  It was a nightmare.  Holes weren't where they should have been, some pieces didn't have any holes at all, and the directions were flat-out wrong in some areas.  Now I've put together my fair share of furniture, but this one took the cake for being the biggest nightmare ever to have to be assembled.  In the end, though, it finally all worked out, though I will be writing the company a strongly-worded letter about their inadequate instructions, materials, and build time.

     Then, I decided to really start attacking my "Project Tower" in my craft room.  The Project Tower is a tower of fabric that I have separated and stacked for specific projects.  Needless to say, it really has become a tower.  One of the items in my project tower was a hooded towel.  I had two that I had to finish, but I knocked out one. 

     For some reason, it looks Day-Glo orange.  It's bright orange, alright, but not as crazy as this picture makes it look.  It's got a dinosaur-print bias edging.

     Last but not least, today I took the time to knock out the "Big Brother/Sister" shirts I've been planning on making for when the baby comes and the kids visit the hospital.  Gotta love the Silhouette and freezer-paper stenciling!

     All-in-all, a very busy week!  I need to sit down and write out a list of the other projects that I'd like to finish so I can at least have it semi-organized.  Right now, I feel as though I'm scrambling a bit.  So hectic around here! 

     Hope you all are staying busy and are ready for the new school year coming up!